Description
CANOR AI 1.10 is an integrated tube amplifier with an entirely new topology equipped with KT88 high-power tubes.
The aim of the development was to merge the best sound characteristics of previous models together. The amplifier operates in a pure class A with an auto-bias function, and with cathode feedback.
Highlights
- Operates in a pure class A with an auto-bias
- Instant switching between a triode and ultra-linear mode
- Possibility to create a monoblock connection of 2 units
Product features
- an integrated tube amplifier in class A with an output power of 2 x 40 W
- KT88 high-power tubes with autobias with a cathode feedback
- an option to immediately switch between triode and ultra-linear mode
- PCB’s utilize our premium CMT ™ technology
- perfect separation of channels by using a relay attenuator / standalone blocks for each channel/gain control by 1 dB and maximum attenuation of 63 dB
- the independently powered control part
- filter capacitors with high capacitance deliver energy to accurate and tight basses
- only use high-quality polypropylene capacitors have been used in the signal path
- absolute selection and tubes matching with above-average parameters
- an option of synchronous control enables the use of two amplifiers in a monoblock mode without the need of using an extra preamplifier and that is a Master/Slave mode with an output power of 80 W per channel
Specifications
| Output power | 2 x 40 W /4,8 Ω – ultralinear 2 x 20 W /4,8 Ω – triode |
| Gain | -30 dB (at 8 Ω) -28 dB (at 4 Ω) |
| Inputs sensitivity | 500 mV |
| Frequency range | (10 – 50 000) Hz ±0,5 dB / 5 W |
| Input impedance | 30 kΩ |
| Inputs | 5 x RCA, 2 x XLR (active only in monoblock connection) |
| Total Harmonic Distortion | <0,05% / 1 kHz, 5 W |
| Signal-to-noise ratio | > 95 dB |
| Filtration capacity | 2200uF / 500V |
| Damping factor at 4 Ω load at the output | 9 (based on measured output impedance) |
| Damping factor at 8 Ω load at the output | 10,5 (based on measured output impedance) |
| Tube complement | 4 x KT88 / 1 x 12AX7 / 2 x 12AT7 |
| Power | 230 V / 50 Hz / 375 VA |
| Input power | 220W |
| Dimensions (w x h x d) | 435 x 170 x 485 mm |
| Weight (net) | 26 kg |
